2 Example of Bioprocess Job

{ Posted on 9:30 PM by Kenny Lischer }

Friends, this is the example for job at bioprocess field. Let's read what is the requirement. I hope you can know about what the bioprocess engineer must be...ok let's check it out...

Job 1,
Bioprocess Assistant, Quality Control

from areastartups.com


Job Decription

Description

Implement and perform a variety of analytical and functional reagents testing. Maintain quality standards for processing materials into partially finished or finished reagent products. Operations are performed in a clean room and are conducted under GMP guidelines.

Primary Duties / Responsibilities:
Set up, adjusts and operate laboratory equipment such as microscopes,
centrifuge, agitators, HPLC,
Spectrophotometer, UV/VIS, and other equipment
Test samples of manufactured products to verify conformity to specifications.
Test and review date for raw materials/finished products using a wide range of
analytical instruments
Document test results and report abnormalities
Implement test procedures and validate equipment
At least 3 years experience in QC laboratory conditions


Qualifications:
The ideal candidate must have a Bachelors and/or Masters in biological or other
science related field and 3+
years relevant industrial experience in the manufacture or development of FDA
regulated Biological
Products. Clinical or commercial manufacturing experience preferred. Broad
based technical knowledge with
manufacturing equipment (i.e. Bioreactors, filtration, mixers, purification etc.).
Must possess mechanical
aptitude. Only candidate with relevant industry experience will be considered for the position.

Job 2,
Bioprocess Assistant, Enzyme Production

from areastartups.com


Job Decription

Description

Perform a variety of enzyme manufacturing activities, including cell culture, fermentation, filtration, purification and testing. Operations are performed in a clean room and are conducted under GMP guidelines.

Primary Duties / Responsibilities:
Preparation of media and buffers.
Cleaning, assembly, disassembly, and operation of bio-processing and laboratory equipment.
Fermentor/bioreactor
Cell expansion, fermentation, and harvest/primary recovery.- Complete assigned tasks which include sterilizing vessels, and bioreactor system
Accurately record process documentation
Troubleshoot equipment or process issues as required
Assisting in technical, operational, and documentation problems
Supporting in the execution of validation protocols (IQ/OQ/PQ) for operations equipment and control systems
Develop, review and/or revise processing records and SOPs to support manufacturing operations
Compliance to safety requirements, current Good Manufacturing Practices, Standard Operating Procedures and manufacturing documentation
Other duties as assigned
Experience providing technical support for a GMP manufacturing process, specifically in protein purification and fermentation.
Experience writing technical documentation: such as change controls, protocols, operating procedures.
Experience with commissioning, qualification, and validation of biopharmaceutical equipment and processes.
Demonstrated expertise in bioprocessing unit operations such as fermentation, chromatography, tangential flow filtration



Qualifications:
The ideal candidate must have a Bachelors and/or Masters in biological or other
science related field and 3+
years relevant industrial experience in the manufacture or development of FDA
regulated Biological
Products. Clinical or commercial manufacturing experience preferred. Broad
based technical knowledge with
manufacturing equipment (i.e. Bioreactors, filtration, mixers, purification etc.).
Must possess mechanical
aptitude. Only candidate with relevant industry experience will be considered for the position.

Inspiration from Mr Nasikin

{ Posted on 9:00 AM by Kenny Lischer }





This is inspiration from Mr Nasikin... Ok, I will be great Engineer not bad engineer. be a Profesional

UAS dan Pelantikan Anggota MPM, dan Pengurus BEM dan IM!!!

{ Posted on 12:47 AM by Kenny Lischer }

Tidak terasa minggu depan sudah mulai memasuki masa UAS untuk semester ganjil. Semua warga teknik UI pasti sedang mempersiapkan diri untuk menghadapi UAS nanti. Ok,suggest buat kalian, Face-the-book now. Please don't use your facebook...

Selain UAS juga akan ada event yang lain yang tidak kalah pentingnya, yaitu untuk pelantikan untuk para pengurus-pengurus lembaga di IKM FTUI yang baru yang akan menjabat untuk tahun 2010. Pelantikan akan diadakan untuk melantik anggota MPM, dan pengurus BEM dan IM.

Jadwal pelantikan :

Pelantikan anggota MPM : Senin, 7 Desember 2009. jam 12 @kantek dalam.


Pelantikan pengurus BEM dan IM : Kamis, 10 Desember 2009. jam 12 @kantek dalam.


Jadilah saksi untuk mulainya pengurusan baru lembaga IKM FTUI tahun 2010

Akhir kata, selamatkan menjalankan UAS, semoga kita semua mendapatkan nilai yang terbaik dan jangan lupat untuk datang pada pelantikan nanti.